Baoji Zhipu Non-Ferrous Metals Processing Co.,Ltd is one of the most famous China tungsten wire rope manufacturers and suppliers, welcome to wholesale cheap tungsten wire rope products from our company and factory.

Product Information

---

 

Product Name	Tungsten Wire Rope
Grade	W1, W2
Purity	W≥99.95%
Perpendicularity	＞89°
Appearance	Bright Surface
Product Model	ZP-WSS
Brand Name	ZHIPU
Origin	China, Shannxi, Baoji
Application	Silicon single crystal growth furnace lift system "soft shaft" use

 

Technical Parameter

---

 

Product Model	Diameter	Structure (Z Type Winding)	Room Temperature Bearing Force (kg)
ZP-WSS-1.0	Φ1.0	7 x 7 x 7	90 ± 3%
ZP-WSS-1.8	Φ1.8	7 x 19 x 4	200 ± 5%
ZP-WSS-2.0	Φ2.0	7 x 19	250 ± 5%
ZP-WSS-2.5	Φ2.5	7 x 19 x 7	430 ± 5%
		7 x 19	450 ± 5%
ZP-WSS-3.0	Φ3.0	7 x 19	900 ± 10%
ZP-WSS-4.0	Φ4.0	7 x 19	1200 ± 10%

 

Performance Characteristics

---

 

Characteristics of "ZHIPU" brand tungsten wire rope:

High temperature resistant, Non magnetic, Super soft, Wear-resistant, Corrosion resistance, No extension, No winding, High strength, Low cost, Long service life.

 

Note The Use Of Tungsten Wire Rope

---

 

The performance characteristics of metal tungsten material is: high strength, high hardness, brittleness at room temperature, even if the diameter is made into fine filaments, has certain softness, but still belongs to brittle material, only in the condition of high temperature, to show a certain plasticity, and maintain good performance of high temperature strength. Therefore, when using tungsten wire rope should be paid attention to the following:

1. Before the use should check the appearance of the tungsten wire rope surface quality and check whether there is a good thing the impact of indifference, induration, and hard to fold, tungsten wire rope winding uniform should check whether the tightness is appropriate. If found the above defect should immediately stop using it.

2. Tungsten wire rope in the installation process should take put down gently, the winding occurs should follow the detour direction, slowly to solve, cannot use brute force pulling, resulting in death.

3. In furnace charging, come and open the oven door closed, must equipment such as machinery parts again after running to the specified location, to avoid collision, squeezing, damage the tungsten wire rope.

4. Tungsten wire rope after high temperature using, its internal organizational structure has changed, brittleness at room temperature increase, so the up-down material, are connected to the tungsten wire rope to tapping the heavy hammer, etc, to avoid severe vibration, strike. To avoid the damage internal organization structure of tungsten wire rope, wire break.

5. Tungsten wire rope in use is rotated, the direction of rotation should be followed when weaving around direction, otherwise the tungsten wire rope will be scattered or kink, caused the broken wires.

6. The next furnace furnace charging, furnace should check carefully whether the tungsten wire rope after use before causing defects as mentioned above, upon examination that the tungsten wire rope in good condition, can use, otherwise the new tungsten wire rope to prevent security needs to be replaced.

 

Tungsten Wire Rope Related Certificate

---

 

 

Packaging

---

 

1. The vacuum bag packaging.

2. The vacuum.

3. The carton packaging.

4. The cartons or wooden cases.